Ideal for high water pressure. Simple snap on hose connector for connecting hoses to taps and watering appliances. Suitable for standard 1/2" BSP connection.

Turn water, collected and stored in a water butt, into an even more valuable commodity by pumping it to all corners of the garden. Place the 24cm high x 14.5cm diameter submersible pump into your water butt and enjoy the maximum hourly output of 2200 litres, creating enough pressure to run a hosepipe with spray gun attachment. Mains operated with a max head height of 11m.

The black Harcostar 25mm plastic hose is an ideal accompaniment to Harcostar branded products, and gives you additional flexibility in linking-up or positioning water butts just where you want them. In fact, the Harcostar 25mm diameter hose - sold in full metre lengths - is perfect for use with the Harcostar Universal Rain Trap, Overflow Kit and the Linking Kit; simply replace the supplied pipe with the length you require and you’re away.

The starting point for a mains-fed garden watering or irrigation system, our Brass Tap Connector screws onto any ¾" garden tap and provides a connection for other brass or plastic hozelock-style connectors.

The brass tap connector is easily screwed tightly into position thanks to the two easy-grip rings on the head and two rubber washers - one inside the connector and the other on the nozzle - give a leak-proof performance. Use the connector to start off your garden watering system, such as a soaker hose, by connecting to our brass quick connector or quick connect coupling with water stop. The brass tap connector will also screw onto the four way tap manifold in the same way as it does a tap.

Increasing your garden watering capacity is an appealing prospect for all vegetable and ornamental gardeners - and the Brass 4 Way Hose Tap Manifold can do just that!

The manifold simply screws onto a standard ¾" garden tap and allows you to run up to four separate hoses - each with an individual shut-off valve for complete control over your watering - opening up the possibility of operating numerous watering systems at once! The solid brass manifold will provide you with many years (and thousands of gallons) of problem-free garden watering and each outlet is fully Hozelock compatible - allowing you to simply click on your hose and go! Be aware that you may experience a loss in water pressure at certain peak demand times, but shutting off one of the valves will boost the flow to the remaining three open outlets.

We strongly advise draining and removing the Brass 4-Way Hose Tap Manifold with Shut-Off from the tap before frost sets in and storing in a shed or garage in extreme winter weather.

Simply screw this Brass Y Manifold to any garden tap with a common 3/4" BSP tap connection and you've doubled your water supply - it's that easy! Not only does the Brass Y Manifold with Shut-Off increase your watering capacity; the 2 individual shut-off valves give you full control over the water flow, meaning you can manage your garden irrigation with ease. The brass construction will give plenty of years of reliable watering service - the Brass Y Manifold with Shut-Off carries a 10 year guarantee - and each outlet is fully Hozelock compatible.

We strongly advise removing the Brass Y Manifold with Shut-Off from the tap and storing in a shed or garage during extreme winter weather.

The Pressure Reducer is a very handy piece of kit for any garden watering enthusiast - it easily screws onto an outside tap where it reduces the pressure of the water to 1 bar allowing low pressure and water butt-fed kits to be used with mains water.

The high quality moulded plastic reducer can be screwed to a ¾" or ½" outside tap by way of the adaptors and will take the pressure right down to 1 bar from a maximum of 10 and the Hozelock type attachment at the other end of the water pressure reducer means that fixing hosepipes is a doddle. The 2 year guarantee 'reduces the pressure' and lets you concentrate on your watering duties!