The ingenious Harcostar Downpipe Connector Rain Trap will fit all regular sized downpipes of 63, 68, 80 and 100mm diameter, plus 61 and 65mm square. The flexible hose allows the water butt or tank to be placed in the most convenient position and the system easily connects with all our butts and tanks.
• Fits all regular sized downpipes of 63, 68, 80 and 100mm plus 61 and 65mm square pipes. • Not designed for use with cast iron downpipes • Unsuitable for use with Beehive Water Butt (GWT-260)
If you've a large allotment, vegetable plot or kitchen garden and envisage a summer of heavy watering, then the Harcostar Water Butt Linking Kit will play an essential part in your water butt-based water collecting and distibution system.
The Harcostar Water Butt Linking Kit consists of a 1.5m long section of flexible plastic pipe and two plastic elbow connectors and by fitting this product, two or more water butts and rainwater tanks can be easily linked together to increase your water storage capacity. As rainwater is free and a valuable garden commodity, linking a series of butts together with the Harcostar Water Butt Linking Kit makes both economic and environmental garden sense!
• Harcostar Water Butt Linking Kit consists of 1.5m of pipe and 2 x elbow connectors • Kit can be fitted to top or bottom of Harcostar water butts • Pre-drilled and blanked off ports on water butts accept linking kit • Simple to install • Uses heavy duty plastic nuts and rubber washers to create a watertight seal • Connecting linking kit at bottom means all butts in chain will fill at same rate • Top linking works just as well but last butt in series will only fill when all others reach capacity • Other accessories - Rain Trap and Overflow Kit - also available • Full range of Harcostar Water Butts also available
Water Butt Overflow Kit - The Overflow Kit is an essential piece of equipment if you are planning to direct rain water from your downpipe straight into your water butt and are not using a rain trap, it will allow excess water to be directed to a suitable drain or soak-away.
• Overflow Kit is only required if a raintrap is not fitted • 1" Diameter Pipe • 1.5 metres long • The overall connector projects 6cm from the waterbutt