The starting point for a mains-fed garden watering or irrigation system, our Brass Tap Connector screws onto any ¾" garden tap and provides a connection for other brass or plastic hozelock-style connectors.

The brass tap connector is easily screwed tightly into position thanks to the two easy-grip rings on the head and two rubber washers - one inside the connector and the other on the nozzle - give a leak-proof performance. Use the connector to start off your garden watering system, such as a soaker hose, by connecting to our brass quick connector or quick connect coupling with water stop. The brass tap connector will also screw onto the four way tap manifold in the same way as it does a tap.

Increasing your garden watering capacity is an appealing prospect for all vegetable and ornamental gardeners - and the Brass 4 Way Hose Tap Manifold can do just that!

The manifold simply screws onto a standard ¾" garden tap and allows you to run up to four separate hoses - each with an individual shut-off valve for complete control over your watering - opening up the possibility of operating numerous watering systems at once! The solid brass manifold will provide you with many years (and thousands of gallons) of problem-free garden watering and each outlet is fully Hozelock compatible - allowing you to simply click on your hose and go! Be aware that you may experience a loss in water pressure at certain peak demand times, but shutting off one of the valves will boost the flow to the remaining three open outlets.

We strongly advise draining and removing the Brass 4-Way Hose Tap Manifold with Shut-Off from the tap before frost sets in and storing in a shed or garage in extreme winter weather.