Greenhouse Bubble Insulation is a must if you’re considering making the most of the greenhouse this winter and covering the inside of your greenhouse with this made-for-greehouses insulating material you'll be keeping heat in your greenhouse and money in your pocket!

Our 1.5m (5') wide tri-laminated, UV stabilised bubble insulating film is the real deal (102g/sqm) - beware of the packing bubble wrap weighing only half as much and you can easily burst the bubbles with your fingers as this won't do the job - and will help to keep an unheated greenhouse frost free so greatly reducing fuel/electricity consumption in heated greenhouses, saving up to 50% on heating costs! The tri-laminate construction creates a strong 'sandwich' effect making our bubble insulation the best around - you'll find it hard to burst our bubbles! - and as the material is UV stabilised too, you can bank on it maintaining winter warmth for years to come!

The Greenhouse Glazing Bead is specifically designed for Eden greenhouse models but can be used on most other greenhouses. The "C" shaped Acorn type glazing bead is a popular section designed to go over a raised 'pip' on the glazing bar.

If you're unsure as to whether this greenhouse glazing bead is the correct one for your model please contact us and we'll happily supply you with a sample length.

This high density green polyethylene netting has eyelets woven into the seam of the net to provide strong tying points - the netting can also be used as a windbreak netting for temporary or permanent protection of your crops.