Special Features
• Includes thermostatically controlled Heat mat, with a accurate temperature range of 0-40°c, and remote soil sensor.
• High top for over wintering of High Plants 0.5m
• A 1.2x0.5m heating area
• No tools required for assembly or disassembly
• Strong UV stabilised clear cover
• Zipped Adjustable Ventilation Sides
• Rapid “Push-fit” System
• Spraywater Proof
• Disassembles easily and quickly
• Even-Heat distribution
• Replacement covers available
• Powder coated Main Frame and Base Mesh

• The twin zipped access panels enable easy access to the propagator.
• The Poly Push-fit System is manufactured from strong polypropylene and these fittings enables the powder coated main frames to be inserted and fixed with ease by hand. No tools are required for assembly or disassembly of the propagator
• 50cm x 120cm Jumbo heat mat is thermostatically controlled with a temperature range of 0-40°C. The aluminium foiled mat spreads the heat evenly within the propagator. The heat mat rolls up for easy storage.
• Twin zipped end panels open and close side vents for ventilation.
• Remote temperature sensor is inserted into the soil being used for propagation. It then maintains the temperature which has been set on the thermostat.

What The Experts Say...
"This well-designed electric propagator comes complete with a thermostatically controlled, 150W heat mat with a temperature range of 0-40°C...you won't need tools to put it together and it can be rolled up for storage when not in use." Let's Grow Veg, Issue 7

• The 81cm/32" high Two Tier Greenhouse Staging units provide a very versatile greenhouse workbench
• Safety edged, double-folded staging trays are supplied as standard, giving extra strength and ensuring there are no sharp edges
• Staging units supplied in a natural aluminium finish
• Staging benches can also be supplied in either Single Tier or Three Tier versions and in a variety of widths, lengths and tray options
• Addition of lower tier provides an area ideal for standing out plants or for storage
• Sturdy aluminium frame supports the 'lift out' trays, which can be removed and placed outside the greenhouse when necessary to 'harden off' plants in early spring
• Remove trays completely to grow plants through the framework such as tomatoes
• Trays are all safety edged, providing a rigid surface with no sharp edges
• Each tray can be used as a gravel tray or flat working area
• Staging units can be turned into automatic watering benches when used in conjunction with our high quality capillary matting
• Choose aluminium slats for the lower tier, which will then provide good air circulation when over-wintering larger plants
• Each tray is replaced by six 55mm (2") wide aluminium slats
• Each module strength tested to hold 7 x 25 litre compost bags
• Staging footplates available where ground is uneven
• All the prices quoted include all the necessary trays, nuts and bolts to make a complete bench
• Full assembly instructions included

"I am very pleased with the Greenhouse Staging, it was all I wanted and a bit more. In a former life I used to design bolt together steelwork so I appreciate the design and the accuracy of the cutting and drilling of the components." Mr Blakeway, Hampshire.

• Black Forest Catalytic Heaters have a built-in energy saving package of catalytic burner and thermostat
• Effective and cost-efficient greenhouse heating
• Wide thermostat range of 2-25 degrees C
• Environmentally friendly
• Platinum coated catalytic burner produces CO2 enriched air
• Automatic temperature control
• Frost-watch mode
• Flame failure device
• Piezo ignition
• No installation - just stand on floor or flat surface in greenhouse
• Pressure regulator and 1.4m of tubing included
• Propane gas cylinder not supplied but available from garages, diy stores or camping/outdoor pursuits outlets
• 3 year guarantee on both heaters
• Can also be run on butane gas if desired

2kw Catalytic Heater Vital Statistics
• Heating output: 2000W
• Gas consumption: 0.156kg/hour
• Dimensions: 450mm L x 490mm H x 160mm W
• Connection: 8mm hose tail
• Capable of heating a greenhouse up to 12 cubic metres

3.5kw Catalytic Heater Vital Statistics
• Heating output: 3500W
• Gas consumption: 0.297kg/hour
• Dimensions: 430mm L x 770mm H x 170mm W
• Connection: 8mm hose tail
• Capable of heating a greenhouse up to 20 cubic metres in size

TOP TIP: insulate your greenhouse with our UV stabilised, tri-laminated Bubble Insulation (GHE-015) and cut your heating bills by as much as 30%!

Contact our horticulturalist Martin Fiddes with your greenhouse questions or queries