These Steel Fruit Cage Braces give our steel cages extra rigidity when exposed to high winds or softer soil. Two types are available; corner braces and mid-braces - and both require fitting as the cage is being erected. The braces can be used on any of our steel fruit cage designs - standard, peaked or domed.

The new improved fruit cage door kit has a steel supporting brace for extra stability, is made from 25mm (1") square galvanised painted steel as our heavy duty steel fruit cages and is supplied with one foot plate for added stability.

A steel, zinc plated foot plate for the door hinging upright is supplied as standard with steel fruit cages but is not included with the door kit for aluminium fruit cages, this foot plate ensures the hinging upright maintains position in softer soil conditions. Extra foot plates for all uprights can be supplied at an additional cost.

Make installation of your Steel Fruit Cage even easier - especially in particularly hard or stony soil - with our Steel Ground Sockets and Driving Cap. Just hammer the sockets into the ground - protected by the cap - and insert the cage upright, which will be held firmly in position.

If you plan to erect your aluminium cage on a site that regularly experiences high winds, and /or if the soil condition is light and sandy, we recommend the addition of these Aluminium Fruit Cage Braces to give your cage extra rigidity. One brace kit, which will work on either a corner upright or a side upright, contains two aluminium struts and all the fittings required. The brace can be fitted after assembly of the main framework or retro fitted to an existing cage. Cages up to 6m (19’6’’) x6m (19’6’’) will require braces at the corners only, for bigger cages (in any direction) we recommend that at least the middle upright is braced on the sides over 6m (19’6’’) of the cage.

These braces are only suitable for use on our 25mm gauge walk-in Aluminium Fruit Cages, not the aluminium tubing and build-a-ball vegetable cages we also supply.

The 25mm diameter aluminium fruit cage door frame is 970mm wide and is supplied complete with locking hinges, clip-on door catches and a separate door catch upright - Please note one aluminium fruit cage door kit is included in the cost of all our standard aluminium fruit cages.

The Plastic Garden Track allows you to create an instant extra wide outdoor walkway in seconds -simply join the heavy duty plastic tiles together with linking clips to create a 39cm wide, 3m long movable pathway for the garden. Further Garden Tracks can be clipped together to increase the length of any walkway, and thanks to the side link kit, it is possible to create wider paths and panels to cover any area as well.

Extra Value Savers: buy 2 plastic tracks and save £4

Timber Fruit Cage Door Kit - The door itself is 850mm (33.5") wide and the framework is made from 102mm (4") tanalised timber. The door comes complete with it's own extra heavy-duty netting, two substantial zinc plated hinges and a hook and eye catch. An additional upright for the door catch and all the fittings complete the door kit.

Take the plunge and start growing cane fruit this year with our Timber Raspberry Supports – you’ll certainly enjoy the results in the kitchen! Equally at home inside or outside a fruit cage, the reassuringly sturdy 10cm/4” diameter timber posts give a growing height of 1.85m/6’ and support the tensionable gripple system of wires and clips, allowing you to place training wires at your discretion. Suitable for use with all cane fruit, the kit consists of the frame – including a half-round top bar 2.5m/8’2” for extra strength - heavy duty anti-bird netting, gripple support wire and clips and full instructions.

Also available is a Double Row Kit - as the above single row kit but with six 75cm/29” wide x 5cm/2” diameter cross supports. This creates 2 parallel rows of growing fruit - essentially doubling your harvest. Twin training wires are positioned at the end of the cross supports to give three intermediate tying-in points.

This sturdy 0.9m/35” W x 1m/3’3” H steel Fruit Tree Espalier/Cordon Frame adds a touch of Kitchen Garden elegance by allowing an apple or pear tree to be trained as a free standing espalier or cordon. The 0.6m/24” long legs stand 0.3m/12” apart and can be pushed directly into the soil or a large pot, and introducing multiple frames creates attractive garden or patio screens and dividers. Full training instructions included, and available in two quality finishes.

Strulch Garden Mulch is used by famous sites such as RHS Wisley, Ryton Organic Gardens, The Eden Project and has been featured on BBC Gardeners World at Berryfields. A light and easy to use mineralized wheat straw garden mulch which reduces weed growth by up to 95%, enriches soil, helps to retain moisture and offers protection around plants.
Also featured on ITV's This Morning Programme - 4th March 2008

Heavy-Duty Anti Pigeon Netting is superior quality, extra heavy-duty, high density polyethylene netting with an 8cm (3") knotted square mesh which ensures protection against all types of pigeon and similar sized birds, but allows snow to fall through when used as a Fruit Cage roof net. Sold per full square metre.

Samples of all Harrod Horticultural netting are available on request - please e-mail our Customer Services Team or telephone 0845 218 5301 with the samples you would like

Protect your crops and bulbs from burrowing rabbits and squirrels with this heavy-duty galvanised wire mesh also suitable for providing an extra deterrent around the base of fruit cages, the rolls measure 10m long by 91cm wide (33' x 3') and available in three mesh sizes.

Deer Protection Netting - 50mm black mesh plastic netting designed for use where deer are a problem - the netting is UV stabilised, rot proof and durable, and strong enough to form an effective barrier.

Extra Value Saver: purchase a 20m roll and save £7!

Our Heavy-Duty Butterfly Netting is made from an extruded black polyethylene netting with a 7mm mesh and is perfect for protecting your vegetable crops - available in 2m and 4m widths. And now you can save more cash - up to £55 - with our new EXTRA VALUE 10m, 25m, 50m and 150m netting packs in 2m widths - see below for details!

Building your own cage is a popular option for fruit and vegetable gardeners, giving you the freedom to invent a frame which suits your needs perfectly - and our range of versatile and easy to use connectors ticks all the boxes. Used in conjunction with our Aluminium Tubing, select from the hard rubber compound Build-a-Balls, ideal for constructing for a straightforward cage to protect vegetables and strawberries; or experiment with the adaptable Swivel Connector Clips to create cloches, plant supports, runner bean or pea frames and even a decorative support for climbers - the list is endless.